[Prev][Next][Index][Thread]

No Subject




Hi there

I have been wanting to build a 6" coil using a length of pvc which I have had
for some time. However, RQs instructions suggest that a) PVC is a poor choice,
b) a lot of drying and sealing is required.

I have access to a 5.25" length of plexiglass tube. Whilst the diameter is
smaller, would I still get a coil which will be expandable (ie. usable with
bigger power supplies)?

Also (to Richard mainly), if I use plexiglass, what shortcuts if any can I take
with drying and sealing?

Cheers
Phil