[Prev][Next][Index][Thread]

Re: New Coil!



 * Original msg to: usa-tesla-at-usa-dot-net

On the search for copper sheet for a ground terminal on Tesla
coil secondaries...

 > You might also find copper sheeting at a local roofing or      
 > aluminum siding company. It is used occasionally for antiquing 
 > effects in some architectural applications.

> Good idea, but this too is a special order type of thing here.
> Stan Harle

Go back to the plumbing supply. Get a three inch long section of 
1-1/2 inch diameter (or similar) copper pipe. Just have them toss
you a scrap or something. Cut or split the section of pipe open
and peen it into the proper shape with a light hammer. It should
work just fine.

Richard Quick





... If all else fails... Throw another megavolt across it!
___ Blue Wave/QWK v2.12