[Prev][Next][Index][Thread]

Re: toroid parts...



At 08:25 AM 8/11/96 -0600, you wrote:
>From SSNSanders-at-aol-dot-comSun Aug 11 06:39:30 1996
>Date: Sun, 11 Aug 1996 08:15:17 -0400
>From: SSNSanders-at-aol-dot-com
>To: tesla-at-pupman-dot-com
>Subject: Re: toroid parts...
>
>Yes, been there, done that , dont like it, ain't goin back. The styro you
>speak of will stay a soup without adequate vent or exposure to air so it is a
>constant battle and an indescribable mess. I filled my secondary PVC, or
>attempted to and it took 3 days to set and Ill bet money if I poked around in
>there a little Id still find some of the sticky fecal muck trash lurking
>about. The coil works but I was suprised it didnt cause a conductive path or
>a fire .Maybe there is some other filler though that might work for a torid
>like a inner tube with air, lawn mower size maybe?      Stephen Sanders
>
Stephen,

        Hobby stores stock a two-part foam which, unlike the aerosol cans,
does not require air to cure.  Expensive though..

Jack