[Prev][Next][Index][Thread]
Re: Primary Q
-
To: tesla-at-grendel.objinc-dot-com
-
Subject: Re: Primary Q
-
From: mrbarton-at-ix-dot-netcom-dot-com (Mark Barton)
-
Date: Wed, 28 Feb 1996 21:50:55 -0800
-
>Received: from ix9.ix-dot-netcom-dot-com (ix9.ix-dot-netcom-dot-com [199.182.120.9]) by uucp-1.csn-dot-net (8.6.12/8.6.12) with ESMTP id WAA19334 for <tesla-at-grendel.objinc-dot-com>; Wed, 28 Feb 1996 22:51:27 -0700
Hi Ed,
Leave things as they are. The tiny difference in interconnect length is
certainly not worth the potential problem of inducing eddy currents in the
capacitor itself.
Zap,
Mark
========================================================================
>the interconnect lengths by physically raising the capacitor and gaps as high
>up as possible. Will I encounter inferference problems with the primary if I
>have these components mounted too close underneath? Like can I mount my
>Condenser Products capacitor to the underside of the plywood that the primary
>sits on? Or should I try to keep everything spaced a foot or so below that?
>
>Thanks, Ed Sonderman
>