[Prev][Next][Index][Thread]
Re: What efficiency?!
On the topic of fibre-optic monitoring....
> > Why not "simply" use a fiber-optic link between the scope and CT? CT-unit
> > would be floating.. This might include AD of the measurement data (and
> > sending the data via fiber in digital form) and then a datalogger
> > (computer) recording the data from the fiber.. One could then run
> > fourier-analysis etc. to the data..
> >
> > One of those things on my "must try some time" list..
> >
> > Kristian Ukkonen.
> >
> > Kristian,
>
> The fiber optic link is the only way to go. I would imagine the link
> would not be an easy or casual thing either. Their is still the emitter
> circuitry right there at the coil! Good luck with it.
>
> Richard Hull, TCBOR
This might not directly relate to the problem being solved here but I
recently had the idea of using two fibres to monitor my rotary gap
position/speed and that was to use one to pipe light to the gap and
the other as the pickup.
Malcolm