[Prev][Next][Index][Thread]

RE: Controller question




I put the filters on both sides if I can afford the expense.  Otherwise and 
also
I smother everything in VL130SL30A varisters.
Barry

 ----------
|From: "tesla-at-poodle.pupman-dot-com"-at-PMDF-at-PAXMB1
|To: Benson Barry; "Tesla-list-subscribers-at-poodle.pupman-dot-com"-at-PMDF-at-PAXMB1
|Subject: Controller question
|Date: Thursday, September 26, 1996 8:51PM
|
|<<File Attachment: 00000000.TXT>>
|From sroys-at-umabnet.ab.umd.eduWed Sep 25 22:02:05 1996
|Date: Wed, 25 Sep 1996 10:32:41 -0400 (EDT)
|From: Steve Roys <sroys-at-umabnet.ab.umd.edu>
|To: tesla-at-pupman-dot-com
|Subject: Controller question
|
|My control cabinet has line filters, a variac, and a relay (along with
|the requisite meters, etc...).  Does it matter what order everything is
|wired up in?  I started off with wall outlet to line filters to relay to
|powerstat and finally out to Tesla filter/safety gap board, but then I
|started thinking about whether that was the best order.  Should the line
|filters be after everything else in order to cut down on the stray RF
|getting back to the relay and variac?  How has everyone else wired things
|up?
|
|Steve Roys.
|