[Prev][Next][Index][Thread]

Re: Arc length vs pwr



Tesla List wrote:
> 
> >From leyh-at-ix-dot-netcom-dot-comSun Sep  8 20:47:07 1996
> Date: Sun, 08 Sep 1996 19:00:05 +0000
> From: "G.E. Leyh" <leyh-at-ix-dot-netcom-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: Arc length vs pwr
> 
> Tesla List wrote:
> >
> > Secondary is wound on skeleton acrylic frame with 240 turns of 14 ga
> > wire. Primary is .375 copper tubing...5 turns. Toroid is 5" x 27"
> >
> > Hope this is helpful
> >
> > Skip
> 
> Thanks Skip, could you also include the input power and
> output arc length, and possibly the gap break rate?
> 
> -GL


Sorry. I included the data in part of your original note. Here it is
again:

ac input power: 720w
output to TC: 12kv -at- 60 ma
arc length(point to point):48"
rep rate:120 per sec (synchronous)
output freq:340khz
pri cap:.0135

Secondary is wound on a skeletal acrylic frame with 240 turns #14.
primary is 5 turns of .375 copper tubing
toroid is 5" x 27"

Skip