Re: Top Toroid

• To: tesla-at-pupman-dot-com
• Subject: Re: Top Toroid
• From: Open Minded <unknown-at-apc-dot-net>
• Date: Sun, 02 Feb 1997 01:29:44 -0800
• Subscriber: unknown-at-apc-dot-net Mon Feb 3 21:51:33 1997

Tesla List wrote:
> 
> Subscriber: ed-at-alumni.caltech.edu Sat Feb  1 21:43:29 1997
> Date: Sat, 1 Feb 1997 09:00:06 -0800 (PST)
> From: "Edward V. Phillips" <ed-at-alumni.caltech.edu>
> To: tesla-at-pupman-dot-com
> Subject: Re: Top Toroid
> 
> Re: Sunchronous gaps
>         In all the posting here I haven't seen any mention of
> adjustment of the mechanical PHASE of the gaps.
> Ed Phillips


Ed-

  On my sync. gaps, I use a NEMA cradle-mount. I adjust the phase
angles by loosening the clamps and rotate the motor. I have seen
other sync. gap designs that used the NEMA face mount. In that case,
a rotary table on a mill was needed to cut the curved slots for the
clamping screws.

- Brent

• Prev: Re: Top Toroid
• Next: Pri/Sec coiling
• Index(es):
  • Main
  • Thread