[Prev][Next][Index][Thread]

Re: foam in inner tubes



    [The following text is in the "ISO-8859-1" character set]
    [Your display is set for the "US-ASCII" character set]
    [Some characters may be displayed incorrectly]

Hi Group,
I know for a fact there are two part forms that cure inside enclosures.
They also vary in hardness depending on how much you put into a fixed
volume. I'm sorry I can't give any product names (can't remember), but it
should be possible.
Dave

----------
> From: Tesla List <tesla-at-poodle.pupman-dot-com>
> To: Tesla-list-subscribers-at-poodle.pupman-dot-com
> Subject: foam in inner tubes
> Date: Thursday, January 09, 1997 12:00 AM
> 
> Subscriber: chip-at-poodle.pupman-dot-com Wed Jan  8 22:56:09 1997
> Date: Wed, 8 Jan 1997 22:28:32 -0700 (MST)
> From: Chip Atkinson <chip-at-poodle.pupman-dot-com>
> To: Tesla List <tesla-at-poodle.pupman-dot-com>
> Subject: foam in inner tubes
> 
> As Stephen Sanders said, you'll end up with a mess.  However, I do
believe
> that there is some other type of foam.  Some computer equipment is packed
> between plastic bags filled with some poly urethane foam.  The foam
> conforms to the shape of the equipment.  I believe that a guy I once
> talked to said he could make it as hard as he wanted by adjusting one
> component, but that was a long time ago.  (I was buying a Citoh 101
> terminal for oh-so-cool home use with my state of the art 2400 bps modem)
> 
> Chip
> 
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
>  Chip Atkinson 
>  http://bhs.broo.k12.wv.us/homepage/chip/info.htm
>  --- Tighten it 'till it strips and back off half a turn ---
> =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-