[Prev][Next][Index][Thread]

Re: Powerstat connections



Subject: 
           Re: Powerstat connections
      Date: 
           Sun, 30 Mar 1997 12:21:25 -0600
      From: 
           Chuck Curran <ccurran-at-execpc-dot-com>
        To: 
           Tesla List <tesla-at-pupman-dot-com>
References: 
           1


Tesla List wrote:
> 
> Subject:
>         Powerstat connections
>   Date:
>         Sat, 29 Mar 1997 11:00:51 -0700 (MST)
>   From:
>         Stanley Harle <lazer-at-earth.wazoo-dot-com>
>     To:
>         Tesla List <tesla-at-pupman-dot-com>
> 
> Hey y'all,
>         I recently disconnected my entire setup for a much needed
> rearrangement of the lab/garage/junk heap, and can't find the connection
> diagram that I had for my 29 A powerstat.  Does anyone have them handy?
> I
> want to do the 0-140% 115V connection, and I don't relish the idea of a
> search through the archives.
> 
> Thanks,
> Stan Harle
> Alamogordo, NM

Stan:
        The timing of your question is perfect--I have my Superior
Powerstat
catalogs sitting right here on the desk!  The connection for I believe
all of the Superior commercial units for the 140% connection would be
input on points 1 & 2 and output from points 1 & 3.  I looked at about 8
of their connection diagrams and all were identical.  If it is not a
Superior Powerstat, then pitch these connection comments in the junk
pile with the other stuff you cleaned up!  I had the catalog out cause I
just got a second Superior 1256D unit to parallel with the first (with
current balancing choke), another project I guess.

Chuck Curran
Cedarburg, WI