Subject: Rotory gap design?
Date: Fri, 30 May 1997 10:58:52 -0700
From: "David Knaack" <dknaack-at-rdtech-dot-com>
To: "Chips Tesla List" <tesla-at-pupman-dot-com>
When designing a rotory gap, what are desiarable charastics? I have
seen
comments mostly on dwell time and break rates. Brake rates can be
adjusted
by adjusting rpms, but what about dwell time? Is a shorter dwell
better?
Is there an optimal duration?
David Knaack