[Prev][Next][Index][Thread]
Re: Fw: Input frequency (fwd)
---------- Forwarded message ----------
Date: Mon, 03 Aug 1998 10:09:34 +0300
From: Marco Denicolai <marco-at-vistacom.fi>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Fw: Input frequency (fwd)
At 21:54 02/08/98 -0600, you wrote:
>
>
>---------- Forwarded message ----------
>Date: Sun, 2 Aug 1998 12:50:09 +0100
>From: "chris.swinson" <chris.swinson-at-zetnet.co.uk>
>To: tesla list <tesla-at-pupman-dot-com>
>Subject: Fw: Input frequency
>
>
>-----Original Message-----
>From: chris.swinson <chris.swinson-at-zetnet.co.uk>
>To: tesla list <tesla-at-pupman-dot-com>
>Date: 01 August 1998 22:09
>Subject: Input frequency
>
>
>Hi All,
>
>Say if you had a Neon say, 10Kv at 50ma running on the usual 230V 50Hz
>mains. As far as I can gather if you use 230V input but at 100Hz you would
>actually get 20Kv at 50ma, thus more wattage input.
You'll get the same 10kV, 50mA but at 100 Hz frequency. Probably less, because
increased frequency will result in increased core losses and your output power
will drop down.
________________________________________________________________________
Marco Denicolai Vista Communication Instruments, Inc.
Hardware Development Manager www.vistacom.fi
marco-at-vistacom.fi Kaisaniemenkatu 13 A
fax: +358-9-622-5610 SF-00100 HELSINKI
phone: +358-9-622-623-15 Finland
Remember, Murphy was an optimist! I am not...
________________________________________________________________________