[Prev][Next][Index][Thread]

Re: The GE Xray caps.... (fwd)





---------- Forwarded message ----------
Date: Wed, 5 Aug 1998 11:15:16 -0600
From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: The GE Xray caps.... (fwd)

to: Shaun

Call the manufacturer to be sure they are rated for pulse duty service.  DC
filter caps don't work well in Tesla oscillators and are not designed for
rapid voltage reversals which slowly damage them.  If you need the
manufacturers tel, just go to your local library and do some serious
research in the Thomas Register which contains the address and phone
numbers of all the serious manufacturers in the US.

DR.RESONANCE-at-next-wave-dot-net


----------
From: Tesla List <tesla-at-pupman-dot-com>
To: tesla-at-pupman-dot-com
Subject: Re: The GE Xray caps.... (fwd)
Date: Tuesday, August 04, 1998 9:28 PM



---------- Forwarded message ----------
Date: Mon, 3 Aug 1998 23:23:44 -0500
From: Shaun <shaunobrien-at-geocities-dot-com>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: The GE Xray caps.... (fwd)

>---------- Forwarded message ----------
>Date: Sun, 2 Aug 1998 17:39:25 -0500 (CDT)
>From: Larry Bud Melman <gasman-at-althea.a-line-dot-net>
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: The GE Xray caps....
>
>> For the record, most of GE's X-Ray caps are manufactured by Plastic
>> Capacitors, Inc., in Chicago, IL.   We carry them in stock and derate
them
>> for Tesla coil service to 50 kV.  Value is .01 MFD with 1/4 inch stud
>
>
> Hmmm - looks like 5 of these would do me -
>
> So what does one cost??  Dr. Res?

    In a Fair Radio Sales flyer I got they had .01µF 100Kvdc caps from
goverment surplus. Could these be used for tesla service like rating them
for 50Kvac? They are 5" X 10" X 2.5" and have 1" #12 studs on either end.

----------