[Prev][Next][Index][Thread]

X-ray tube spec sheets on my page...




----------
From:  Bill the arcstarter [SMTP:arcstarter-at-hotmail-dot-com]
Sent:  Thursday, May 07, 1998 10:25 AM
To:  tesla-at-pupman-dot-com
Subject:  X-ray tube spec sheets on my page...

Coilers,
 Several people have spoken to me over the months about various rotating 
anode X-ray tubes.  I've scanned up a few pages of technical info on 
some of these tubes and placed them on my page.  These are curves of 
tube current vs voltage and filament current.

The three sheets are:
http://www.geocities-dot-com/CapeCanaveral/Hangar/6160/eureka1.gif
http://www.geocities-dot-com/CapeCanaveral/Hangar/6160/eureka2.gif
http://www.geocities-dot-com/CapeCanaveral/Hangar/6160/eureka3.gif

You can also get to these links via my electric2.html page.

I know some coilers are powering X-ray tubes off their tesla coils - 
perhaps this information would be helpful.  (whew - was afraid this 
would be completely non-tesla! :)   )

-Bill the arcstarter
Starting arcs in Cinci, OH
http://www.geocities-dot-com/CapeCanaveral/Hangar/6160


______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com