Re: Help with Pig Training

• To: tesla-at-pupman-dot-com
• Subject: Re: Help with Pig Training
• From: FutureT-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Sun, 15 Nov 1998 11:02:11 -0700
• Approved: terryf-at-verinet-dot-com

In a message dated 98-11-14 21:52:02 EST, you write:

<< The NST supply was 15 kV / 120 mA + R-C protection with a 0.024 tank cap.
> I'm using the same tank-cap, tapped at the same primary turn, just
> substituting power source.  Have safety gaps each line to earth + filter
> caps (no R element for pig).  Ammeter bounces to 10-15A on firing.  Effect
> is independent of RSG speed.
 
> Any ideas ??
 
> Thanks
  
> Mark >>

Mark,

Maybe the gap spacing is too wide for the 13kV?  I guess you've 
tried varying the amount of ballasting?  Also you might not be getting
13kV because of the ballasting.  

John Freau

• Prev: Re: Current draw ?
• Next: Re: streamer hit
• Index(es):
  • Main
  • Thread