Re: Primary Flashover

• To: tesla-at-pupman-dot-com
• Subject: Re: Primary Flashover
• From: Hollmike-at-aol-dot-com (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Sun, 22 Nov 1998 07:13:14 -0700
• Approved: terryf-at-verinet-dot-com

In a message dated 11/22/98 4:58:55 AM Mountain Standard Time,
tesla-at-pupman-dot-com writes:

>  I don't want to change the
>  coupling by removing the first turn of the primary or raising the
>  secondary. Does anyone have a solution?

You could apply several coats of epoxy to the bottom windings of the
secondary.   You could also do the same to the first turn of the primary, or
slide a length of  tubing(silicone or maybe tygon) onto it.
Mike
]

• Prev: Hello UK Coilers
• Next: Re: Terry's GM HEI Coil Update.
• Index(es):
  • Main
  • Thread