spark gap ?

• To: tesla-at-pupman-dot-com
• Subject: spark gap ?
• From: "chris.swinson" <chris.swinson-at-zetnet.co.uk> (by way of Terry Fritz <terryf-at-verinet-dot-com>)
• Date: Wed, 02 Sep 1998 17:49:38 -0600
• Approved: terryf-at-verinet-dot-com

Hi all,

My first coil used a single gap which was set to about 5mm.  I later changed
to a multi gap, all gaps are 1mm appart using copper tubes ( RQ type).  This
improved my coil no end, It must have gave about 50% increase in output.

What I want to know is, if I half the gaps to say, 1/2mm, and use twice as
much tubes, will this increase power again ?


All the beST,
Chris.

chris.swinson-at-zetnet.co.uk
www.users.globalnet.co.uk/~mega01/    <--- moved site to...
www.users.zetnet.co.uk/mega.disczine/

• Prev: Re: New Book
• Next: Re: Tube coils, was Rectifier Rods
• Index(es):
  • Main
  • Thread