[Prev][Next][Index][Thread]

Re: TOROID?? (fwd)





---------- Forwarded message ----------
Date: Wed, 14 Jan 1998 18:52:00 EST
From: Mark S Graalman <wb8jkr-at-juno-dot-com>
To: tesla-at-pupman-dot-com
Subject: Re: TOROID?? (fwd)

  Well it sounds to me like you need to build a
bigger one!!

Mark Graalman

On Wed, 14 Jan 1998 13:57:45 -0700 (MST) Tesla List <tesla-at-pupman-dot-com>
writes:
>
>
>---------- Forwarded message ----------
>Date: Wed, 14 Jan 1998 13:44:06 -0600
>From: Zuma <mwise-at-ns.sosis-dot-com>
>To: Tesla List <tesla-at-pupman-dot-com>
>Subject: Re: TOROID?? (fwd)
>
>Tesla List wrote:
>> 
>> ---------- Forwarded message ----------
>> Date: Wed, 14 Jan 98 11:36:21 EST
>> From: Gary Lau  14-Jan-1998 1127 <lau-at-hdecad.ENET.dec-dot-com>
>> To: tesla-at-pupman-dot-com
>> Subject: Re: TOROID??
>> 
>> >From: Zuma <mwise-at-ns.sosis-dot-com>
>> >I recently made a toroid, it is wraped in aliminum tape. My 
>question is,
>> >is there anything Ican do or coat it with to suppress break out??
>> 
>> Isn't that a bit like building a flashlight and looking for 
>something good
>> and dark to paint the lens with?  One generally _strives_ for 
>breakout from
>> a toroid.
>> 
>> Gary Lau
>> Waltham, MA USA
>Premature breakout!!!!!!! Not to suppress any discharge!!!!
>ChrisJ
>
>