[Prev][Next][Index][Thread]

Re: Temperature to melt NST tar (fwd)





---------- Forwarded message ----------
Date: Mon, 19 Jan 1998 17:36:33 -0700
From: "D.C. Cox" <DR.RESONANCE-at-next-wave-dot-net>
To: Tesla List <tesla-at-pupman-dot-com>
Subject: Re: Temperature to melt NST tar (fwd)

to: Kevin

Best source is T & R Electric, Colman, SD.  They carry 12 KV units in
stock.

DR.RESONANCE-at-next-wave-dot-net


----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Re: Temperature to melt NST tar (fwd)
> Date: Sunday, January 18, 1998 2:20 PM
> 
> 
> 
> ---------- Forwarded message ----------
> Date: Sun, 18 Jan 1998 15:16:31 -0500
> From: Kevin Wahila <wawa-at-spectra-dot-net>
> To: Tesla List <tesla-at-pupman-dot-com>
> Subject: Re: Temperature to melt NST tar (fwd)
> 
> >
> >NST are not really designed to do the best job.  Pick up a good 12 KV
> >potential xmfr and use a small series reactor on one of the primary
legs. 
> >That will provide 160-200 ma continuous and they are nearly
indestructable.
> >
> >DR.RESONANCE-at-next-wave-dot-net
> 
> Where would one go about getting a potential transformer from?
> 
> Thanks,
> Kevin