[Prev][Next][Index][Thread]

NST Cores



I was unpotting three 7.5Kv 30mA NST's the other day
and I accidentally overcooked them. I burnt out all the
tar and the insulation the wire, the paper in between
the secondaries layers, everything. So I cut off all
the wire, soaked them in lacquer thinner, wire-brushed
them, sanded, etc.

So now I have three NST cores and I was wondering what
the best thing to do with them would be. I do not want
to wind them again just to get 7.5KV, but is there
anything else I could do to get more voltage?


Thanks in advance, 

Chris.

===
...Courtesy of Yahoo! Mail...

_________________________________________________________
Do You Yahoo!?
Get your free -at-yahoo-dot-com address at http://mail.yahoo-dot-com