Re: Toroid Material

• To: tesla-at-pupman-dot-com
• Subject: Re: Toroid Material
• From: Alex Crow <user-at-alexcrow.clara-dot-net> (by way of Terry Fritz <twf-at-verinet-dot-com>)
• Date: Fri, 23 Apr 1999 12:35:58 -0600
• Approved: twf-at-verinet-dot-com

Andy

With duct I dont think it's really necessary to cover with tape - breakout may
occur slightly sooner without it, but it will still work. I'm testing at the
moment with an untaped toroid.

Alex Crow


Tesla List wrote:

> Original Poster: "Andy Cleary" <gemware2-at-dreamscape-dot-com>
>
>         I was wondering if it is a good practice to use flexible aluminum
duct
> plain as a torus without coating it with the shiny metal flue tape?  I had
> never seen it encouraged, but I found the flue tape to be too expensive for
> my budget.  I have noticed that most often the torus should be smooth, and
> if that be the case then I'm sure the plain duct would be right out.  Thank
> you for any comments,
>
> -Andy

• Prev: Re: PE-Caps, tests, and some questions
• Next: Re: Just wonderin' (fwd)
• Index(es):
  • Main
  • Thread