Re: Using MicroSim

• To: tesla-at-pupman-dot-com
• Subject: Re: Using MicroSim
• From: "Malcolm Watts" <malcolm.watts-at-wnp.ac.nz> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 04 Aug 1999 20:43:52 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi Terry,
          Just for the record:

> Original Poster: Terry Fritz <twftesla-at-uswest-dot-net>

<snip>
> measurements.  The resistances in series with Cself and Ct are measured
> using my brand new HP34401 meter.  I don't think anyone has ever really
> considered or measured these before...  I should point out that many of my

I measured the secondary ESR of the coil I used as an example in an 
article by accurately measuring its Q and computing R out of the mix. 
For that particular coil (a spacewound one) I found that ESR (from 
memory) was roughly 4x the DC resistance.

Regards,
Malcolm
<snip>

• Prev: RE: Using MicroSim
• Next: Re: Spark gap resistance
• Index(es):
  • Main
  • Thread