Re: Beginner Coil

• To: tesla-at-pupman-dot-com
• Subject: Re: Beginner Coil
• From: "Jim Lux" <jimlux-at-jpl.nasa.gov> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Wed, 01 Sep 1999 17:12:38 -0600
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Build one about 15" long and 3" in diameter (depending on what you can
scrounge as your form, PVC pipe is easy). Use bare #12 or #14 house wire
for the primary. Use that flexible dryer duct and pie plates to make a
toroid.

----------
> From: Tesla List <tesla-at-pupman-dot-com>
> To: tesla-at-pupman-dot-com
> Subject: Beginner Coil
> Date: Tuesday, August 31, 1999 9:13 PM
> 
> Original Poster: "Gary White" <wtdog-at-hotmail-dot-com> 
> 
> I just got a 9Kv 30Ma transformer for my first coil.  My question is:
What 
> size coil should I build?
> 
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail-dot-com
> 
> 

• Prev: Re: Blumlein line?
• Next: NST can't power Jacobs ladder!?
• Index(es):
  • Main
  • Thread