[Prev][Next][Index][Thread]

Re: First light...Sort of



In a message dated 99-09-16 07:04:39 EDT, you write:

<<     As a first attempt to improve performance, should I slice out a 20" 
   >   section of the secondary and use that?
      
  >    Aric >>

Aric,

Best to figure out your resonant frequency of primary and secondary
to see what needs to be done to insure tuning.  If you give your wire
diameter, type and spacing for the secondary, we can figure out the
tuning aspects.  If the wire is thin, the secondary might have to be
cut down more than 20" to tune with the primary.  

Cheers,
John Freau