[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Synchronism




> was using seacors with a dv/dt of 4000. I think, since he was using an air
> blast gap, his brak rate went as high as the transformer would let it,
thus
> over-discharging the caps. He said they "blew up" on his webpage, so I'm
> guessing that heat built up in his caps (which have a plasic casing might
i
> add) then they simply exploded.
>
> I'll be using a similar setup with a MMC with a dv/dt of 2700... However,
If I
> keep the bps limited with a good rotary gap, then my MMC should keep nice
and
> cool.

Has anybody ever tried putting their MMC under oil, or with a fan blowing on
them to keep them cool? It would be interesting to build two identical MMCs,
place one under oil or use some other form of cooling and leave the other
just plain and then test the two to destruction. I'm willing to bet that the
cooled MMC would stand up at least a little better. You could probably just
do this with a single cap for each setup and it would be alot cheaper.

Jason  Johnson