[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: home-brew tranny, and depotting NST's



Original poster: "Finn Hammer" <f-hammer-at-post5.tele.dk> 

Chris1

I have, you can see the result, and some of the process at:
http://home5.inet.tele.dk/f-hammer/tesla/tesla.htm

goto museum coil, then homemade pig.

Cheers, Finn Hammer

Tesla list wrote:
> 
> Original poster: "Chris Dobson" <cdobson-at-microtech-dot-com.au>
> 
> Hi all,
> 
> A couple of questions : does anybody have much experience winding their own
> trannies, especially on straight cores, and secondly, what is the best way to
> depot an NST . . . I cooked one in an oven, but the enamel on the primary
> windings (which is what I wanted) got carbonised and therefore U/S. Any
> comments?
> 
> Chris
> 
> Riana, TAS