[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Vacuum tube coils



Original poster: "KN4AB by way of Terry Fritz <twftesla-at-uswest-dot-net>" <kn4ab-at-home-dot-com>

I am an neophyte looking to build a vacuum tube coil using either a 6146 (
which I have several of) or an 811A.  I have a schematic diagram downloaded
from the net, but need a little more help on the physical construction. Can
anyone direct me to a good source.
Thanks,  George'
KN4AB