DI-Electric Oil (Transformer Oil)

• To: tesla-at-pupman-dot-com
• Subject: DI-Electric Oil (Transformer Oil)
• From: "Bob Berg" <berg_bob-at-hotmail-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Mon, 21 Feb 2000 07:23:16 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

I have a source for some synthetic EDM (electrical Discharge Machine) oil.
It has a viscosity of 3.0, Flash Point of 266 Degrees f and a dielectric
strength > 55KV.  It is very thin and and almost water color.  Its called
EDM Supreme by commenweath oil. www.iwebd-dot-com/commonwealthoil
<http://www.iwebd-dot-com/commonwealthoil> .  The spec sheet says it will not
degrade uder high current or high temperature or in the presence of copper
electrodes.   I was wondering if this would be a good choice for rolled poly
caps and transformers...? The stuff goes for over $600.00 a barrel!

Thanks
Bob

______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com

• Prev: RE: Plasma
• Next: Re: abreviations. now NST primary voltage
• Index(es):
  • Main
  • Thread