RE: Wire Gauge and Q?

• To: tesla-at-pupman-dot-com
• Subject: RE: Wire Gauge and Q?
• From: "Basura, Brian" <brian.basura-at-unistudios-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Tue, 04 Jan 2000 17:21:22 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Nathan,

Make sure you don't use a florescent light with an electronic ballast. These
don't oscillate at 60hz.

Regards,
Brian Basura


>> Greetings, All!
 
>Nathan, all,

<snip>
>Well it's easy enough to tell if it's in sync, just tape a white cardboard
>disc onto the gap rotor, and draw a heavy black line across the diameter,
>and if this line can be seen as a fuzzy line that's not rotating when the
>gap is spinning, under fluorescent lighting, then it's locked and synched.
>(some folks have trouble seeing this, so there are other ways to observe
>it....but they're more trouble to set up.  
<snip)

>Coiling for the New Millennium
>John Freau
 
>> Thanks, and Happy New Year!
>> Thank goodness Y2K didn't take down our beloved discussion list!
 
>> Nathan Ball >>

• Prev: Re: To Build a Tesla Coil
• Next: Re: First year 2000 ozone fix!
• Index(es):
  • Main
  • Thread