Re: weird primary design

• To: tesla-at-pupman-dot-com
• Subject: Re: weird primary design
• From: "Steve Bell" <steve-at-breakfix.demon.co.uk> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 16 Mar 2000 15:59:50 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

Hi,

Pre-forming the spiral is a great test of skill and patience, with patience
being th most important.

Check out what I did at http://www.breakfix.demon.co.uk/tesla_primary.html

Steve Bell (Swindon, UK)
steve-at-breakfix.demon.co.uk
http://www.breakfix.demon.co.uk


----- Original Message -----
From: Tesla List <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, March 16, 2000 3:28 AM
Subject: weird primary design


> Original Poster: Fucian-at-aol-dot-com
>
> Hi,
> since I dont have any access to a saw or a drill press,I was wondering if
I
> could take my main 2ft by 2ft board and drill holes where the normal
primary
> wire supports would be.Then I would simply put wire ties on each set of
holes
> thus holding down a turn of the primary.Any one know how to preform the
> primary or know any other alternatives to this since I dont have a saw for
> cutting slats or a drill press for drilling precise holes?
>
>

• Prev: Re: weird primary design
• Next: Re: UV Detection methods was Ultraviolet light from brushdischarge.
• Index(es):
  • Main
  • Thread