Re: Building a Primary

• To: tesla-at-pupman-dot-com
• Subject: Re: Building a Primary
• From: "Ruud de Graaf" <rdegraaf-at-daxis.nl> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Sat, 18 Mar 2000 07:19:48 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

>Original Poster: "David W" <Dav_W926-at-hotmail-dot-com>
>
>    Does anyone have a good method of connecting the ends of copper tubing
in a
>primary when the primary is made of 2 seperate pieces of copper tubing?
>
>    ~Dave
>
Hi Dave,

If you don't like soldering, you could try a clamping-screw fittings to
connect water tubing of the right diameter.

Another methode could be a piece of iron rod with screw-thread all over it
(tap-bolt?). Copper is a soft metal, so tapping should be easy.

But remember: if it not get's hot, solder the lot!

Ruud de Graaf
Greetings from Holland

• Prev: Re: Building a Primary
• Next: Re: primary hard ware
• Index(es):
  • Main
  • Thread