[Prev][Next][Index][Thread]

Re: Building a Primary



>Original Poster: "David W" <Dav_W926-at-hotmail-dot-com>
>
>     Does anyone have a good method of connecting the ends of copper tubing 
>in a
>primary when the primary is made of 2 seperate pieces of copper tubing?
>
>     ~Dave
>

Get a 2" peice of Cu tubeing that will just slip over the tube ends. Solder 
in place and give it a slight bend. We did it and it works great :)

Have fun.


Christopher A. Boden Geek#1
President / Founder
The Geek Group
www.geekgroup-dot-org
Because the Geek shall inherit the Earth!

______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com