[Prev][Next][Index][Thread]

Re: FREE NST's



>Original Poster: "Charles Arruda" <carruda-at-channelseek-dot-com>
>
> > 7. PHASE YOUR NST's (for instructons on this just ask the list, or email 
>me
> > if you don't know already)
>
>Is there a simple way to do this?  What happens if they are "out-of-phase"? 
>  Is
>there a "lead-lag" circuit to correct phase-shift from mismatched 
>transformers?
>
>C=
>

There are a half dozen ways to do this. :)
The way we use is the following.

Stack the NST's on top of one another and hook the 120V sides in paralell. 
If they are the same size and brand they will usually work just fine.

Attach a 6" piece of HV wire (15Kv NST wire)on each terminal (HV side) of 
one NST (2 seperate wires).

1 at a time bring the end of each wire close to the HV terminal of the other 
transformer. If they arc, they're out of phase. If you cannot get an arc, 
shut down, unplug, and connect the HV wires to the corresponding HV terminal 
on the top transformer.

It's that easy. :)

btw, Allinsons are backwards from Jeffersons while France and Jeffersons are 
the same.




Christopher A. Boden Geek#1
President / Founder
The Geek Group
www.geekgroup-dot-org
Because the Geek shall inherit the Earth!

______________________________________________________
Get Your Private, Free Email at http://www.hotmail-dot-com