Re: 40kV ingnition coil

• To: tesla-at-pupman-dot-com
• Subject: Re: 40kV ingnition coil
• From: "Bill Noble" <william_b_noble-at-email.msn-dot-com> (by way of Terry Fritz <twftesla-at-uswest-dot-net>)
• Date: Thu, 30 Mar 2000 23:57:26 -0700
• Approved: twftesla-at-uswest-dot-net
• Delivered-To: fixup-tesla-at-pupman-dot-com-at-fixme

when I made CD ignitions, I would use between a quarter microfarad and 2
microfarads at about 250 volts to excite the primary of the ignition coil -
usually nearer the low end of that range.
----- Original Message -----
From: "Tesla List" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, March 30, 2000 11:12 AM
Subject: 40kV ingnition coil


> Original Poster: "jason wallace" <jcwallace-at-cybrtown-dot-com>
>
> i have a quiestion for all who can ans.
> i just purched a 40kv ingition coil does anyone know what size cap i
should try
> using with this. And if so do they have any suggestions on how i should
make a
> coil out of this. i have made some using a dim switch and a small cap and
a 12v
> ingiton coil to produce a 2 inch spark.
> thanks
> jason wallace <mailto:jcwallace-at-cybrtown-dot-com>jcwallace-at-cybrtown-dot-com
>
>
>
>

• Prev: Re: mmc caps
• Next: Re: MMC cap questions
• Index(es):
  • Main
  • Thread