[Prev][Next][Index][Thread]

Re: Ctop Measurement vs. Calculation



In a message dated 5/22/00 9:10:45 AM Pacific Daylight Time, tesla-at-pupman-dot-com 
writes:

>  snip
>  If others have done similar tests, what were the results? 
>  
>  Thanks in advance, 
>  Bart (happy to be coiling again!)

Hi Bart,

When a toroid or sphere is placed on top of a coil, the topload
will show a much lower C than when it is placed on top of an
insulated column.  The closer the toroid or sphere is to the 
top of the coil, the less C the topload will show.  And the wider
the secondary coil is, the less C a given topload will show.

Based on this, your measurements are probably correct.

I think Terry has a computer program available that takes all these
effects into account.

Cheers,
John Freau