[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tesla-d Digest V01 #677



Original poster: "Shaun Epp by way of Terry Fritz <twftesla-at-qwest-dot-net>" <scepp-at-mts-dot-net>

Yup, I've found that out too.  Stay away from the cheap brass colored draw
pulls, they are usually hollow inside ( you can see inside the back were the
screw threads in), just brass coated and it shows.  Then coated brass balls
are brighter and shinnier that the real thing.  Once the brass wears away
they don't work well.  The flattened ones are solid brass and the package
they come in often says solid brass.  Also before you use then, throuw then
in some acetone for awhile to remove the clear coat :-)   This was learn the
hard way by experience about 10 years ago.   oops!


----- Original Message -----
From: <tesla-d-request-at-pupman-dot-com>
To: <tesla-d-at-pupman-dot-com>
Sent: Saturday, August 11, 2001 7:45 PM
Subject: tesla-d Digest V01 #677