[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Maggie help needed
Original poster: "michael.tucknott by way of Terry Fritz <twftesla-at-uswest-dot-net>" <michael.tucknott-at-virgin-dot-net>
Iv just finished taking a few more measurements of the driver system.
I hope they are enough.
Conductor thickness = 2.5 sq. mm
overall dia including insulation 3.5mm
turns = 70
conductor thickness = 8mm
conductor spacing = 4.5mm (average)
spacing between primary & secondary =60mm
number of turns = 70
The toroid on top of the driver measures 13" x 4 1/2".
We also have a number of other toroids that we intend to use on the resonator
coil in order to help tuning, they are of the following sizes.
20" X 4 1/2"
23" X 6 1/2"
28 1/2" X 6 1/2"
48" X 6 1/2"
I hope this is of use, I'm sorry for the mix of units.
Cheers Mike Tucknott