[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: mmc caps



Original poster: "Bert Hickman by way of Terry Fritz <twftesla-at-uswest-dot-net>" <bert.hickman-at-aquila-dot-net>

Brian,

No such luck - I can't find any information on this particular cap. Try
them and see how well they work! :^)

-- Bert --
-- 
Bert Hickman
Stoneridge Engineering
Email:    bert.hickman-at-aquila-dot-net
Web Site: http://www.teslamania-dot-com

Tesla list wrote:
> 
> Original poster: "brian by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<ka1bbg1-at-mcttelecom-dot-com>
> 
> hi,GE 21L3404 FA protected P241 A5AFC. came from power supplies with a 600
> volt shunt winding.
> 
> ----- Original Message -----
> From: "Tesla list" <tesla-at-pupman-dot-com>
> To: <tesla-at-pupman-dot-com>
> Sent: Tuesday, February 13, 2001 11:43 PM
> Subject: Re: mmc caps
> 
> > Original poster: "Bert Hickman by way of Terry Fritz
> <twftesla-at-uswest-dot-net>" <bert.hickman-at-aquila-dot-net>
> >
> > Brian,
> >
> > What's the make and model? As Terry indicates, many modern PFC and motor
> > run caps use a metalized polypropylene-oil dielectric system.
> >
> > -- Bert --
> > --
> > Bert Hickman
> > Stoneridge Engineering
> > Email:    bert.hickman-at-aquila-dot-net
> > Web Site: http://www.teslamania-dot-com
> >
> > Tesla list wrote:
> > >
> > > Original poster: "brian by way of Terry Fritz <twftesla-at-uswest-dot-net>"
> > <ka1bbg1-at-mcttelecom-dot-com>
> > >
> > > Hi Terry,coilers,
> > > Has anyone made a mmc out of oil run caps? I have 66 4uf 440vac caps and
> > got to
> > > thinking why not?
> >
> >
> >
> >
> >