[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: joining stainless steel



Original poster: "Brian Foley by way of Terry Fritz <twftesla-at-uswest-dot-net>" <ka1bbg1-at-mcttelecom-dot-com>

Hi, SG's, i have a pair of wearever fry pans and i used 5 minute epoxy to
glue the 2 halves together. it worked slick. clean it with a good detergent
and use a little scotchbrite or sandpaper to ruff up the surface first. cul
brian
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, December 30, 2000 7:13 PM
Subject: joining stainless steel


> Original poster: "Steve Cook by way of Terry Fritz <twftesla-at-uswest-dot-net>"
<Steve-at-g8cyerichmond.freeserve.co.uk>
>
> I have just found some stainless steel rimless bowls, the sides are almost
> vertical. The metal is about .5mm thick. My idea is to use a pair to make
an
> oblate spheroid top terminal for a coil. Can anybody give me an idea as to
how
> I might a pair together rim to rim.
>
>
>
>