[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RadioShack



Original poster: "Ted Rosenberg by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Ted.Rosenberg-at-radioshack-dot-com>

Tim: Just a quick note. I have been with RS for almost 20 years. If I can
assist with respect to locating a catalog item, let me know. BTW,
regrettably, RS does not sell larger than 5x7 perf board. But theyb are
inexpensive. To build Terry's NST filter, I had to use 2 boards...one for
each HV leg. It worked well but took a bit more room.
If you need a pictorial drawing, contact me off list.

Safety First

Ted


<snip>

I have downloaded your pics about the protection circuit for my NST and I am
a
little unsure about where to start. I am not even sure what perf board is.
However,
I am going to make friends with the local Radio Shack and I will learn.