Re: Three phase TC - Thx all

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

Ben,

The three gang rotary was exactly what I thought of at first. I am going to
build a tripoplar TC as soon as I finish my current project, and as soon as
I get some more cash, and a pig that will put up with all the crps from a
tripolar system.

Thanks for the ffedback
Jason

Geek # 1139 Rank G-1
www.thegeekgroup-dot-org

----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, July 07, 2001 1:56 AM
Subject: RE: Three phase TC


> Original poster: "spoonMAN by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<spoonman534-at-yahoo-dot-com>
>
>
> What if you were to use a 3 gang rotary gap, each gap
> firing 120 deg after the other.. and all dumping into the
> same primary?? I'm not sure how you'd work that out in
> terms of resonance in the secondary though... I don't know
> much about 3 phase, but it sounds like you'd get alot more
> power that way..
>
> Ben McMillen
>
> > Jason,
> >
> > You could build a triangular setup of three coils. This
> > would probably give
> > you the effect you are after but the secondaries won't be
> > synchronized with
> > each other in any way.
> >
> > Or you could fire each coil in sequence utilizing a
> > common rotary spark
> > gap. This would sequence the arcs around in a circle but
> > you wouldn't have
> > the arc attraction/repulsion effect a bipolar has. I'd
> > expect each
> > secondary to arc which ever direction it wants. And while
> > the coils are
> > firing in sequence they still wouldn't be in phase with
> > other. In fact only
> > one would be firing at a time.
> >
> > At this point I don't see any way to make the secondaries
> > resonate
> > 120-degrees out of phase. 180-degrees (Bipolar) is easy
> > as you have the
> > choice of two different directions of magnetic flux to
> > utilize (sort of
> > like a binary circuit). Unfortunately there is no third
> > choice...
> >
> > Regards,
> > Brian B.
> >
> >  -----Original Message-----
> > From: Tesla list [mailto:tesla-at-pupman-dot-com]
> > Sent: Friday, July 06, 2001 2:43 PM
> > To: tesla-at-pupman-dot-com
> > Subject: Re: Three phase TC
> >
> > Original poster: "Jason Petrou by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>"
> > <jasonp-at-btinternet-dot-com>
> >
> > Brian,
> >
> > Your second idea is what I had in mind... I had a
> > 'vision' of a triangular
> > setup in which the arcs jump much as they do in a bipolar
> > circuit... but I
> > have NO idea how this would work
> >
> > Regards,
> > Jason
> >
> > Geek # 1139 Rank G-1
> > www.thegeekgroup-dot-org
> >
> > ----- Original Message -----
> > From: "Tesla list" <tesla-at-pupman-dot-com>
> > To: <tesla-at-pupman-dot-com>
> > Sent: Friday, July 06, 2001 8:14 PM
> > Subject: RE: Three phase TC
> >
> >
> > > Original poster: "Basura, Brian by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>" <brian.basura-at-unistudios-dot-com>
> > >
> > > Jason,
> > >
> > > I've thought this quite a bit. First off you need to
> > clearly define what
> > you
> > > are referring to when you say three phase TC. If you
> > are speaking of mains
> > > power then there are a number of options. You could
> > rectify the three
> > phases
> > > and run a DC coil (Greg Leyhs Electrum comes to mind).
> > Or you could use
> > > three transformers (one on each phase) and three
> > primary caps all switched
> > > into one primary via a rotary spark gap (as outlined by
> > the master
> > himself,
> > > N. Tesla).
> > >
> > >  What I'm aspiring to do is quite a bit different. I'd
> > like to have three
> > > secondarys which are 120-degrees out of phase with each
> > other.  I still
> > > haven't found a strategy to accomplish this in a
> > disruptive coil. I'd
> > > probably have to go with a Toob coil to get the
> > secondaries to be truly
> > > three-phase but I'm not that interested in toobs.
> > Creating a bipolar
> > design
> > > is easy but three phase (tripolar ?) may be
> > impossible...
> > >
> > > Regards,
> > > Brian B.
> > >
> > >  -----Original Message-----
> > > From: Tesla list [mailto:tesla-at-pupman-dot-com]
> > > Sent: Wednesday, July 04, 2001 11:10 AM
> > > To: tesla-at-pupman-dot-com
> > > Subject: Three phase TC
> > >
> > > Original poster: "Jason Petrou by way of Terry Fritz
> > <twftesla-at-qwest-dot-net>"
> > > <jasonp-at-btinternet-dot-com>
> > >
> > > Hi all,
> > >
> > > Would it be possible to build a gap for and actually
> > run a three phase TC?
> > > or would you need to split up the phases and use 3
> > different cap banks?
> > Have
> > > I lost the plot here ;)
> > >
> > > Regards,
> > > Jason
> > >
> > > Geek # 1139 Rank G-1
> > > www.thegeekgroup-dot-org
> > >
> > >
> > >
> > >
> > >
> >
> >
> >
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Get personalized email addresses from Yahoo! Mail
> http://personal.mail.yahoo-dot-com/
>
>
>