[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: good mmc?
Original poster: "Terry Fritz" <twftesla-at-uswest-dot-net>
They have to be high-current high-dV/dT polypropylene. Nothing less will work.
The value of 8nF each is probably too low. If you string say 10 together, the
value of the string will only be 0.8nF so you will need many many strings to
get to most wanted values. That depends a bit on the final value you want
At 03:11 PM 3/11/2001 -0500, you wrote:
> Hi are epoxy dipped film caps good for mmcs?They are 1200volts dc .008uF