[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: good mmc?



Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>" <Fucian-at-aol-dot-com>

In a message dated 3/11/01 4:14:12 PM Eastern Standard Time, tesla-at-pupman-dot-com 
writes: 


>
> Hi Matt, 
>
> They have to be high-current high-dV/dT polypropylene.  Nothing less will 
> work. 
>
> The value of 8nF each is probably too low.  If you string say 10 together, 
> the 
> value of the string will only be 0.8nF so you will need many many strings to 
> get to most wanted values.  That depends a bit on the final value you want 
> however. 
>
> Cheers, 
>
>        Terry 



Oh well, it was a 25 for 5.00 deal on ebay.They are green.The guy knows 
nothing else about them.I guess ill keep saving for a panasonic cap:-) 

matt