[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Motor run caps "USA MFG"



Original poster: "tesla by way of Terry Fritz <twftesla-at-uswest-dot-net>" <tesla-at-paradise-dot-net.nz>

Hi Team
Purchsed some of these myself, good buying even with freight to NZ
Watch very carefully with the values, many are 3 PHASE caps so that 18+18+18
for example is 18uF between 3 terminals in a delta config, you cannot make
3x18uF
Tnx to list for advice on where to buy those, they are currently resonating
the sync rotary supply for phase control nd acting as motor run caps as well
Best
Ted  Linney in NZ
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Wednesday, March 21, 2001 12:28 PM
Subject: RE: Motor run caps


> Original poster: "Duke, Ronn (CCI-San Diego CCC) by way of Terry Fritz
<twftesla-at-uswest-dot-net>" <Ron.Duke-at-cox-dot-com>
>
> Ed,
>
> Try USA Manufacturing http://www.usamfg-dot-net/ <http://www.usamfg-dot-net/> .
They
> have dual range motor run caps up to about 50uf rated at 270v to 660v. You
> could get a half a dozen of them for under $15 including shipping and
> parallel them.
>
> Keep on Coilin,
>
> Sparky
>
>
> -----Original Message-----
> From: Tesla list [SMTP:tesla-at-pupman-dot-com]
> Sent: Tuesday, March 20, 2001 12:29 PM
> To: tesla-at-pupman-dot-com
> Subject: Motor run caps
>
> Original poster: "by way of Terry Fritz <twftesla-at-uswest-dot-net>"
> <Esondrmn-at-aol-dot-com>
>
> I have been looking for a 100 ufd motor run capacitor for the phase
> control
> circuit on my sync rotary gap.  I have checked meci, c & h sales and
> mouser
> and can't find any motor run caps in this range.  Does anyone have
> any idea
> who might have some of these?
>
> Thanks, Ed Sonderman
>
>
>
>
>
>