[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Transformers



Original poster: "Jason Petrou by way of Terry Fritz <twftesla-at-qwest-dot-net>" <jasonp-at-btinternet-dot-com>

The best places to get NSTs are dumps... Really intelligent (and generous)
people seem to believe that when you break a sign the whol thing is
useless... I have found many a good NST this way! They are expensive to get
new, so always go for secondhand.

About Sam's design... very good system. I tried one of the coils from the
twin system and it wiorked very well. I would get a more powerful NST
though... 9/30 is a bit lame! Go for 9/60 or 12/60 if you can get it. Also,
you dont need a variac (IMHO). You can use a dimmer switch if you cant find
a variac. (I know people will tell me that a variable inductive supply such
as a variac is better than a variable resistive supply, but I find that I
can get more control from a dimmer :)

Regards,
Jason
----- Original Message -----
From: "Tesla list" <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Thursday, May 24, 2001 12:07 AM
Subject: Transformers


> Original poster: "Ben Murrell by way of Terry Fritz <twftesla-at-qwest-dot-net>"
<benmurrell-at-att-dot-net>
>
> Does anyone know where I can acquire  A 9kV, 30mA (270W) Neon Sign
> Transformer? And a 1A variac with 15uF 60Hz power factor correction ? I am
> trying to recreate Sam Barro's work so I can begin on my own designs. This
> would help me alot.
> Thanks,
> Ben
>
>
>
>