Re: G-10 Success

["Tesla list" <tesla-at-pupman-dot-com>]

Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <ajones18-at-bellsouth-dot-net>

In <4.1.20011112112122.013f1ad0-at-pop.dnvr.qwest-dot-net>, on 11/12/01 
   at 11:21 AM, "Tesla list" <tesla-at-pupman-dot-com> said:

>Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>"
><Tesla729-at-cs-dot-com>

>My two rotors are still constructed of 3/8" lexan and for the time 
>being, I will leave them in the RSG, as they are still functioning 
>properly. I may eventually want to cut two more replacement  discs
>from the remaining G-10 to replace the current lexan ones  and even
>replace the threaded brass electrodes with tungsten.  I will most
>likely have to have the disc cut out by a machinist  as I don't have
>the proper tools for cutting out a perfect circle. 

Why does a rotor have to be round? Cut it square, place the flying
electrodes equal distance apart and they'll still turn in a circle.
You can bet they ain't gonna turn in a square pattern.

Alan