[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: How many STSG's in service?



Original poster: "Sundog by way of Terry Fritz <twftesla-at-qwest-dot-net>" <sundog-at-timeship-dot-net>

Hi All, Weazle!

 I've got one!  Check
http://sundog.timeship-dot-net
under the 3" coil section.  I've used it on my 3" coil with pretty good
success.  I've run 3kva through that gap with no trouble other than noise.
Quenches excellently, runs reliably, and enclosed in the PVC pipe like it
is, there's not much light leakage.  Build one and run the heck outta it!
You'll be out maybe $50 total to build one from scratch with all new parts.
It's easier and less fuss than a SRSG.  If you have a TCBOR gap, it's pretty
easy to convert to STSG.

Shad
----- Original Message -----
From: Tesla list <tesla-at-pupman-dot-com>
To: <tesla-at-pupman-dot-com>
Sent: Saturday, November 24, 2001 1:53 PM
Subject: How many STSG's in service?


> Original poster: "J. B. Weazle McCreath by way of Terry Fritz
<twftesla-at-qwest-dot-net>" <weazle-at-hurontel.on.ca>
>
>
> Hello Coilers,
>
> Lately there hasn't been much discussion on the list concerning
> the triggered gaps and I was wondering how many are now running
> them and what your results/comments where?
>
> Has anyone switched to a triggered gap from a sync rotary, and
> if so, what differences did you notice?  Has there been anyone
> besides myself that has been experimenting with the "dimmers"
> to finalise a design or are we still beta testing?
>
> I'd like to hear from any and all about your findings, as I've
> found my own experiments not only interesting but rewarding in
> the way my coil performs with a STSG.
>
>
> 73, Weazle, VE3EAR/VE3WZL
>
> Listening: 147.030+ and 442.075+
> E-mail:    weazle-at-hurontel.on.ca
>            or ve3ear-at-rac.ca
> Web site:  http://www.hurontel.on.ca/~weazle
>
>
>
>