[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Bleeder resistors



Original poster: "Vince D'Amore by way of Terry Fritz <twftesla-at-qwest-dot-net>" <vincedamore-at-earthlink-dot-net>

Hello People
 
 I have a question about bleed resistors for my MMC that I am building.
I'm going to be using .150uF caps rated at 2kV each.  
Will a 1meg ohm resistor across each cap be sufficient?
Any info on this would be greatly appreciated.
 
Thanks
 
Vince