[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: SW variable cap measurements
Original poster: "Eleanor Flood by way of Terry Fritz <twftesla-at-qwest-dot-net>" <eflood-at-bellsouth-dot-net>
If you decide to coat glass with white candle wax or paraffin use care
in melting, it flash flames readily.....best melt it in a double boiler
using low heat. You might try pure beeswax if available, it melts at
lower temps. Either wax will be hard to clean off the pan. I have one
pan I save just for wax melting.
Another possiblity....I don't know what chemical is in Rain-X, but it
does shed water from glass.... I personally would want to check out the
chemistry ...anyone know about this?
Safe coiling and safe wax melting.