[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: series MOTS, pole pigs, etc
Original poster: "by way of Terry Fritz <twftesla-at-qwest-dot-net>" <FutureT-at-aol-dot-com>
In a message dated 4/23/02 3:58:41 PM Eastern Daylight Time, tesla-at-pupman-dot-com
Yes, that works fine.. Kevin eldredge does this for his Bigggg coil.
> I'm wondering if I could do this with two 11kV pole pigs? I was thinking
> I could ground one of the HV bushings on each pig, and place the
> primaries in parallel. This would essentially provide a 22kV centre
> tapped transformer with no extra stress on the insulation, right?